5.8G FPV Duo 5800 Diversity Receiver with two modules A / V receivers Airwawe 5.8 GHz modulation Two receiver for best reception D58-2 DUO5800 5.8Ghz Wireless AV FPV Diversity Receiver

5.8G FPV Duo 5800 Diversity Receiver D58-2 DUO5800 5.8Ghz Wireless AV FPV Diversity Receiver with two modules A / V receivers Airwawe 5.8 GHz modulation Two receiver for best reception

The receiver is designed to optimize distance and transmission quality of an audio / video signal in 5.8 GHz.

Supplied with:
- A receiver DUO 5800 5.8 GHz
- A cable audio / video output with female jack (yellow = video, audio R = red, white = audio L).
- A power adapter jack to 2.1 mm naked son
- 2 3 dBi omnidirectional antennas
 
Specifications:
- Two modules A / V receivers Airwawe 5.8 GHz modulation (FM)
- 7-channel receiver (compatible transmitters ImmersionRC, Airwave, Lawmate ...): 5740, 5760, 5780, 5800, 5820, 5840, 5860 MHz
- Automatic receiver according to reception quality
- Single button control
- Dual audio / video output for simultaneous connection of two devices (eg glasses and recorder)
- Audio output module dedicated follower antenna from the same manufacturer (optional)
- Level of video output: 1 Vpp
- Signal level audio output: 3Vpp
- Two-SMA antenna connectors female, 50 ohm impedance.
- Low battery indicator
- Witness the active receptor
- Sensitivity -85 dB theoretical
- Power supply: 6 to 12 volts (3S lipo from 2S)
- Weight: 195 grams
- Dimensions: 100 x 84 x 24mm

There are two modes can be performed with these receiver, here is a brief how to use DUO5800 Diversity Receiver

• To receiver two different channels at the same time (one receiver two transmitters mode)

1. Mount both antennas on, either the stock ones or yours.
2. Connect the AV cables to the AV output AV1 & AV2, and switch the desired channel to use.
3. Switch the DIP Switch (POWER ON),  RF indicator will be on to the related receiver.
4. Plug in the power cable, that's it.

• To perform the diversity mode (two different types of antennas, one transmitter mode)

1. Mount both antennas on first.
2. Connect the AV cable to the "TRACKER LINK"
3. Switch the DIP switches of "POWER ON" for RX1 & RX2
4. SET RX1 & RX2 to the same channel
5. LED4 as RF1, LED3 as RF2.  The LED indicator will be on and indicates which antenna reception has the strongest reception.  The diversity mode will perform itself