DJI Innovations Zenmuse Z15 Gimbal System Support SONY Nex5/Nex7Panasonic GH-1/GH-2 Soodohobby

DJI Innovations Zenmuse Z15 Gimbal System Support SONY Nex5/Nex7Panasonic GH-1/GH-2 Soodohobby

The Zenmuse Z15 supports 4 types of camera, which are the Sony Nex 5, Sony Nex 7 and Panasonic GH-1/GH-2, it's important to make sure that you select the correct gimbal option for your camera. So, pls tell us your camera type when you purchase.

Features
 
DJI Zenmuse Z15 Camera Mount Sony NEX 5.
 
The 3-axis Zenmuse Z15 NEX 5 camera gimbal system has been designed for professional filming, aerial photography and commercial use, its design, mechanical structure & construction gives a high level of precision, the control angle is within the range of ±0.05°, so pictures or video recorded will be very smooth even when the aircraft is in high-speed flights. The slip rings inside the Zenmuse avoid the complicated and exposed wiring seen on other camera gimbals to the servos. All the wires of the power and signal lines are integrated into the gimbal body, which means that  the Z15 can rotate without any limitation. The yaw control could reach ±360°, the pitch control could reach ±360° and the roll control could reach ±40° (±360° mechanic continuous rotation).
 
The Zenmuse Z15 camera gimbal owner benefits from the experience gained at DJI Innovations in UAV autopilot system, perfect attitude-stabilized algorithms, together with the Zenmuse Z15 gives class leading performance and seamless integration without the requirement of any extra installations and extra wires, it's easy to assemble and use while delivering stable images while flying.
 
A separated controller is added  to the Z15 gimbal and is connected by the CAN wires with the main controller of DJI Wookong autopilot system. According to gimbal attitude feedback, it can control the rotation directions and angles with high precision and also communicate and get real-time control orders from the main controller of autopilot system. In order to minimize the payload of aircraft, a video output module with expanded features like camera shutter and  customized HDMI signal to AV convertor is included in the Z15 body, once again keeping the external wires to a minimum and ensuring the smooth and free movement of the 3 axial gimbal.
 
Within the Z15 Zenmuse you will find DJI a customized gimbal servos drive module, this meets all the control requirements of the high performance Zenmuse gimbal. With these very high precision, low vibration, high torque servos, the DJI is an excellent combination of power and precision!  While the Z15 supports most of transmitters and receivers in the market, the Futaba S-Bus receiver system is supported and it's the most user-friendly option.
 
Controlling the Zenmuse gimbal 3-axis rotation function is very easy simple and simple to apply. The stick range corresponds with rotation speed of gimbal axis. The excellent control algorithm guarantee high precision performance of the rotation in all axis's. The control algorithm of the Zenmuse gimbal means that the rotation speed will not be influenced even when the aircraft is in high-speed spinning or quick lifting.

Zenmuse gimbal system has three control modes, which are Orientation-locked control mode, Non Orientation-locked control mode and Back to Mid-point mode (Horizontal mode). The three types of modes can be switched quickly from one mode to another to meet the changing requirements of the aerial photographer. With the perfect mode and easy operation of the stable 3-axis Zenmuse gimbal, users can take excellent aerial photographs & video.
 
 
 
 
 
 
 
 
 

Built-In Functions:
 ■
Three Working Modes, Orientation-locked control, Non orientation-locked control & Back to mid-point (Horizontal mode).
 
■
Built-in independent IMU module.
 
■
DJI gimbal special servos drive module.
 
■
HDMI-AV module.
 
■
S-Bus receiver support 

Electrical & Mechanical Characteristics:
 ■
Working Current Static current: 200mA (@25V), Dynamic current: 400mA (@25V), Locked-rotor current: 4A (@25V)
 
■
Operating Temperature -10°C ~ 50°C.
 
■
Communication Interface CAN (Compatible with ACE One & WKM).
 
■
Weight 880g (Without UBEC, HDMI-AV module).
 
■
Dimensions 200mm × 200mm × 230mm.
 
■
Frame Dimensions For Camera (Inside) 115mm × 75mm.

Working Performance:
 ■
Load Weight (Reference Value) 392g (@Panasonic GH2).
 
■
Angle Control Accuracy ±0.05°.
 
■
Max Controlled Rotation Speed ±180°/s.
 
■
Controlled Rotation Range Yaw control: ±360° continuous rotation.
 
■
Pitch control: ±360° continuous rotation.
 
■
Roll control: ±40° (±360° mechanic continuous rotation). 

■

Peripheral:
 ■
Supported Cameras, SONY Nex5 / Nex7 & Panasonic GH2.
 
■
Input Power 4S~12S LiPo
 
■
Control Requirement Four spare receiver channels
 
■
Assistant Software System Requirement Windows XP SP3; Windows 7

■