FPV 2.4G 2000mW Wireless AV Transmitter Receiver Set 12Ch A/V frequency

Specifications:

• The AV Receiver Transmitter Set has two wires: one is audio & video connect wire, connecting receiver to the monitor or TV. Another wire connects transmitter to camera
• Change transmitter's small switch place can change transmitter's frequency like the following picture
• Please use outdoor antenna to transmit. Or else it can arose the antennas more hotter to affect transmitting efficiency
• Don't touch the bare parts of antennas because the transmitting frequency is high
• Transmitter uses 12V / 3A power supply, and camera must use another power 12V / 800mA 

Receiver:

• Voltage: DC 7-12V
• Output Current: 900mA
• Video Output: 1Vp-p(FM)
• Audio Output: 1Vp-p(FM)
• Operation Temperature: -10¡æ~+50¡æ

Transmitter:

• Voltage: DC 12V
• Output Power: 2000mw
• Output Current: 1.5A
• Audio Output: 1Vp-p(FM)
• Audio Carrier Ware: 5.5M 6.0M
• Frequency: 2.4G/12CH, 2.410G 2.430G 2.450G 2.470G, 2.490G 2.510G 2.390G 2.370G, 2.350G 2.330G 2.310G 2.290G

Package Included:

• 1 x 2.4G Channels Wireless AV Receiver
• 1 x 12CH 2W Wireless AV Transmitter
• 1 x Power Supply of Transmitter
• 1 x Converter Cable
• 1 x AV Cable

Attention:

• Should install this Receiver Transmitter Set at the place where children cannot touch
• Please pull the transformer out when you stop using the receiver and transmitter
• Do not touch the emission antenna in case you will be burned when the transmitter is electrified
• Do not expose it at the damp place for preventing the receiver and transmitter from water or protecting people from electric shock
• Please use the transformer produced by our company. Or our company will not be in charge of any damage incurred by the product made by other companies
• Our company will not be responsible for any damage incurred by your amending or dismounting without a permit

Installing:

• The line has 5 plugs for connecting transmitter,camera and power supply.One of the line's points connecting to transmitter,another has 4 plugs(red,yellow,white,black).Red plug connect DC 12V/1000mA,can also connect battery.White and yellow plug connect to camera's audio and video apart.And black one connects camera's power input jack.
• Push the CONTROL button,can change teh channel of receiver.Meanwhile,push it and last several seconds,can colse the digital play and turn into saving power model.Then push it again,can replay.The function can be able to lock channel,so as to avoid mistaking operation.
• Set the same channel with transmitter and receiver