- Categories
- Multi-copter Set
- Multi-copter controller
- Multi-copter Frame Kit
- Multi-copter Propeller
- Multi-coper Cam Gimbal
- Multi-copter ESC
- Multi-copter Motor
- DIY Accessory
- Spare Parts
- FPV Wireless System
- Flybarless/Gyro system
- RC Airplane
- RC Helicopter
- Helicopter Blades
- Plane Blades/Propeller
- RC Boat
- RC Car
- Servo
- Battery
- Radio Control System
- Balance Charger
- Wire/Line/Silicone Wire
- 3K Carbon Fiber
- Photography Equipment
- Screws/Nuts/Washer
- Adhesive Tapes
Recently Viewed
- Home
- Multi-copter Set
- FPV UAV Multicopter
- Hexa Multicopter DJI Spreading Wings S800 motors, ESC, Landing Sys PNP Soodohobby
- Description
- Shipping Methods
-
Hexa Multicopter DJI Spreading Wings S800 motors, ESC, Landing Sys PNP Soodohobby
DJI Spreading Wings S800 is a professional Hex-Rotor Platform Big Aircraft, designed for commercial aerial photography (AP) and experienced model enthusiasts. It has the advantage of stable flight, large load weight and long flight time. Combined with DJI WooKong-M multi-rotor autopilot system, S800 can easily perform precise hovering, constant-speed cruise and big maneuverability turning.
Specifications
Frame-
Diagonal Wheelbase: 800mm
-
Frame Arm Length: 350mm
-
Frame Arm Weight (Including Motor, ESC, Propeller): 304g
-
Center Frame Diameter: 240mm
-
Center Frame Weight: 365g
-
Bi-pod Size: 500mm(Length)×415mm(Width)×320mm(Height) (Top width: 145mm)
-
Bi-pod Weight: 428g
-
Total Weight: 2.6Kg
Motor-
Stator Size: 41×14mm
-
KV: 320rpm/V
-
Max Power: 360W
-
Weight: 147g
ESC-
Current: 40A OPTO
-
Voltage: 6S LiPo
-
Signal Frequency: 30Hz ~ 450Hz
-
Drive PWM Frequency: 24KHz
-
Weight: 18g
Propeller-
Material: Carbon Fiber
-
Size: 15x4"
-
Weight: 15g
Flight Parameters-
Takeoff Weight: 5.0Kg ~ 7.0Kg
-
Load Weight: 0Kg ~ 2.5Kg
-
Power Battery: LiPo (6S、10000mAh~15000mAh、15C(Min))
-
Max Power Consumption: 2100W
-
Hover Power Consumption: 720W(@ Takeoff Weight 6Kg)
-
Hover Time: Max: 16 min (@10000mAh&6KgTakeoff Weight)
All the circuitries from batteries to electronic components of Frame Arms, PMU and gimbals are integrated into Centre Frame, which simplifies the wiring,reduces the possibility of malfunction and helps a lot to operate quick disassembly.
With innovative integration design of Frame Arms, all the power and signal wires of motor, ESC and LED indicator are embed into Frame Arms, which makes the S800 Frame Arms look simple and neat, not a batch of separated parts and wires. Special slot design makes Frame Arms and Centre Frame with a complete circuitry. The overall design is safe, reliable, simple and stable, proved by long-time strict testing.
Clear guiding signs (
and
) for connection are shown on the Centre Frame and Frame Arms. The connection sequence between Frame Arms and Main Controller is also shown as signs which help avoid incorrect installation.
Includes:
- 1 set Central Board
- 6 pcs Arms
- 6 pcs Motor 4114 kv320
- 6 pcs ESC 2-6S 40A
- 6 pcs 15" Carbon Fiber Propeller
- 1 set Landing Skid
Requires:
- 1x Multi-Rotor controller
- 1x 6S Li-Po 10000mAh - 15000mAh 15C (Min) battery
- 1x Aircraft radio transmitter and receiver system with fail safe function.
For the flight controller, pls see the link below:
For the camera gimble, pls see the link below:
-
Write Your Reviews
Have any question or inquire for this item? Please contact Customer Service. (Our customer representative will get back shortly.)