- Categories
- Multi-copter Set
- Multi-copter controller
- Multi-copter Frame Kit
- Multi-copter Propeller
- Multi-coper Cam Gimbal
- Multi-copter ESC
- Multi-copter Motor
- DIY Accessory
- Spare Parts
- FPV Wireless System
- Flybarless/Gyro system
- RC Airplane
- RC Helicopter
- Helicopter Blades
- Plane Blades/Propeller
- RC Boat
- RC Car
- Servo
- Battery
- Radio Control System
- Balance Charger
- Wire/Line/Silicone Wire
- 3K Carbon Fiber
- Photography Equipment
- Screws/Nuts/Washer
- Adhesive Tapes
- Home
- Multi-copter Set
- FPV UAV Multicopter
- ARF version IDEA-FLY IFLY-4S Foldable UAV quadcopter with auto-balance and altitude position FLYC4S Good for aerial photography
- Description
- Shipping Methods
-
IDEA-FLY IFLY-4S Foldable UAV quadcopter with high quality altitude position Good for aerial photography
FLYC4S upgrade the fuselage is a carbon fiber plate, moreharder to break, wheelbase greater, more suitable for camera and FPV
Features:
has high strength carbon fiber cantilever collapsible design.
• equipped with four low-noise brushless motor.
• 4 able to better indicate status highlight LED.
• equipped with a full set of high-performance flight control system (ESC flight control power connection plate) and the installation and commissioning.
• Weight: 810 g (receiver and battery not included).
• Maximum load capacity: 700g (receiver and battery included).
• Maximum take-off weight: 1550g. Do not overload affect flight status is recommended.
• two-axle distance: 550MM
• Optional connection is a biaxial PTZ.
• Easy to install, only need to calibrate the remote control to start flying.
• foldable, easy to carry.
• more high tripod design.
• based IFLYC4E, comes with the camera auto-balance function output, without having to buy the camera balanced instrument.
Height control system • Improved high-performance, regardless of how changes in the load always been able to pinpoint the height.
• automatic take-off and landing, allowing runaway automatically slow landing effectively avoid smashing machine events (height mode).
• better wind resistance, three wind is still able to easily fly.
• minimum 4-channel remote control can flight (not control mode and PTZ)
• comes with 4 bright LED light and buzzer, to provide real-time flight status indication.
• internal built-in voltage detection processing module can detect the battery voltage and other information, real-time monitoring of battery usage.
• with automatic compensation the biaxial (roll, pitch) PTZ control output.Introduction of IFLYC4E Flight Controller: IFLYC4E is a flight control system specially designed for IFLY4S, which is all-in-one module includes controller, gyroscope, accelerometer and barometer, etc. It supports normal transmitter, offers 6-way PWM ESC output, has online upgrade support and expended GPS, extremely easy to fly even without any adjustment.
Function
- Manual flight mode, it offer basic automatic stabilizationin this mode.
- Auto-balanced mode, in this mode the quad can keep auto balance.
- Height lock mode, in this mode the quad can keep the altitude hold ,alsocan auto-take off and auto-landing .
- Fail safe ,when the Throttle value lower than 15% (height hold mode) ,the quad can auto Slow uniform decline, auto turn off when finish landing.
- 7 channel Radio input.
- 2 axis camera mount output.
- 6 channel ESC output
- One channel LED mode output
- One buzzer output
- The internal integrated power module
Features
- 3 axis Gyro (with good antiknock characteristic)
- 3 axisAccelerometter.
- High precision barometer
- Universal contact USB connector makes it easy to adjust and upgrade.
- 2 axis camera mount control output.
- 6channle PWM standard ESC output
- Internal Integrated UBEC ,can provide 5V/500MA output
- Internal integrated voltage can monitor warning function
Can expand COMPASS and GPS connector
Propeller:
Material: Plastic
Propeller size: 10inch * 2
Anti-rotating Propeller: 10inch * 2Motor:
Bushless Motor: (IFly2212)11.1v
Drive Configuration: direct drive for each axis
Governor: 15A digital governor
Diameter: 28.5mm
Weight: 42g (without plug)
Shaft distance: 3mm
Fixed hole pisition: 16mm*19mm
Voltage: 11.1v/14.8v 850kvCamera Mount: (Optional)
Camera Mount with vibration isolation
Material: carbon fibe
Number of axes: single axisCamera mount purchase from here: http://www.soodohobby.com/2-axis-camble-gimbal-IFLY-CT6-Two-axis-AP-tilt-Camera-Amount-Gimble-for-IDEA-FLY-IFLY-4S-or-Ifly-4-with-2pcs-Servos_g.html
Workding Enviroment:
Ambient Humidity: <%80
Ambient temperature: 0-60 (Celsius degrees )
Ambient wind speed: <4m/sIFLY-10A PWM High-speed ESC
1. Output Current: continuous current 10A, short-time current 15A (less than 10 sec.)
2. Power Input: 3 li-po battery input.
3. Port Type: highspeed I2C data port(1000khz-400khz).
4. Safe Rotation Protection: when the motor is suddenly stopped or locked during working, the motor output will automatically stop and will not restart until several seconds waiting, which is effectively protect the ESC and motor from burning.
5. No driving Noise: the highspeed output driver can protect you from those boring noise.IF2212 Brushless Motor
This motor is only 45g, specially designed for IFLY-4 multi-rotor aircraft. IDEA-FLY motor adopts latest magnet material with higher effeciency and payload voltage. Besides, its unique all-in-oneblade holder structure can effectively decrease distance between propeller and motor, avoid resonance cased by motor working and speed changing.Package Includes:
1 x Flight Controller
1 x IFLY-4S KIT
4 x Motor
4 x ESC
1 x CDSingle-axis Camera Mount and camera in the pictures is not included. It need purchased separetely (Optional)
Write Your Reviews
Have any question or inquire for this item? Please contact Customer Service. (Our customer representative will get back shortly.)
